Vigil PSB 01-2015 Affects 1900+ Units
Advanced Aerospace Designs, manufacturer of the Vigil AAD, sent out a new Product Service Bulletin today that affects more than 1900 Vigil AAD units with cutters manufactured this year.
The PSB is a mandatory cutter inspection requiring each cutter to be sent back to Vigil America or AAD. The inspection is due to a severed closing loop due to rough edges inside a Vigil cutter. The manufacturer will be inspecting each of these cutters for sharp or rough edges for repair or replacement, and then return to each skydiver.
To see if your cutter is affected, see the SN's on the full PSB here: Vigil PSB 01-2015.
If your Vigil AAD unit or cutter is on the list, you must fill out an RMA form on the Vigil web site starting at this link.
Units known to be purchased from ChutingStar include these SNs:
| 44369 |
| 44370 |
| 44371 |
| 44372 |
| 44373 |
| 44374 |
| 44375 |
| 44376 |
| 44377 |
| 44378 |
| 44447 |
| 44502 |
| 44503 |
| 44504 |
| 44505 |
| 44506 |
| 44507 |
| 44508 |
| 44509 |
| 44510 |
| 44899 |
| 44900 |
| 44901 |
| 44902 |
| 44903 |
| 44904 |
| 44905 |
| 44906 |
| 44917 |
| 44918 |
| 44090 |
| 45351 |
| 45352 |
| 45353 |
| 45354 |
| 45355 |
| 45356 |
| 45357 |
| 45358 |
| 45359 |
| 45360 |
| 45396 |
| 45398 |
| 45442 |
| 45449 |
| 45450 |
| 45451 |
| 45452 |
| 45453 |
| 45454 |
| 45455 |
| 44257 |
| 45590 |
| 45591 |
| 45612 |
| 45613 |
| 45614 |
| 45615 |
| 45616 |
| 45617 |
| 45618 |
| 45619 |
| 45761 |
| 45762 |
| 45807 |
| 45808 |
| 45809 |
| 45810 |
| 45811 |
| 45812 |
| 45813 |
| 45814 |
| 45973 |
| 45974 |
| 45975 |
| 45976 |
| 45977 |
| 45978 |
| 45979 |
| 45980 |
| 45981 |
| 45982 |
| 45952 |
| 45963 |
| 45964 |
| 45965 |
| 45997 |
| 45999 |
| 46000 |
| 46001 |
| 46002 |
| 46064 |