Aerodyne Icon Service Bulletin SB300426
Aerodyne released Service Bulletin SB300426 on April 30, 2026, which mandates the AAD cutter placement move to above the reserve pilot chute on its Icon harness/containers. This is a mandatory service bulletin from the manufacturer that is required before the next jump.
Read the full service bulletin at this link.
ChutingStar is able to complete this modification on your Icon. Here is the info:
- Rigging fee: $40 per rig to complete service bulletin
- Does not include a reserve inspection & repack, which will need to be completed unless the reserve is still in-date and was packed previously by ChutingStar
- Return shipping, if needed, is not included
- Turnaround time 1-2 weeks
- Info on dropping off or shipping your rig to ChutingStar at this link
Background info on the issue can be found at this link.