Mockup Menu
Toggle Nav
Cart
Search
Menu
Account

Main Closing Loop: Inspection and Installation

Inspect the full main closing loop. Take the loop out of the main closing loop retainer and grommet. Inspect where the washer rests for any damage. Inspect where the loop passes through the grommet for any damage. Inspect the loop itself. Feel the grommet and washer for sharp edges.
Make a new loop to the desired length with two overhand knots to secure behind the washer. Replace the loop back into the grommet and into the main closing loop retainer. Check that the main closing loop retainer is in good condition and secure. Do a final inspection on the exposed main closing loop. Close the container and go jump! [caption id="attachment_92" align="alignleft" width="444"]Main Closing Loop: Inspection and Installation Main Closing Loop: Inspection and Installation[/caption] Order a set of new main closing loops, manufactured by ChutingStar, at this link.  
Categories: Skydive Gear, Containers, Gear Maintenance & Packing Tips
Tags: Main Container Closing Loops, Main Closing Loops, New Main Closing Loops, Skydiving rig replacement parts, skydiving container main closing loops, skydiving rig main closing loops with washer, Packs of new main closing loops & where to buy main closing loops
Posted On: July 22 2015
Posted By: Mike Gruwell
Search ChutingStar Blog
Recent Posts
Categories
Search ChutingStar Blog
Recent Posts
Categories