To enter the Setup menu, press the button after the self-test section immediately on startup when the menu item "Setup" is displayed.
In setup, you can make an altitude correction for landing at a different elevation than your takeoff elevation. This menu item is also where you can set or change the mode.
For Altitude Corrections, press the button at Alt Cor, and then continuing pushing the button for up or down until you get your desired altitude correction. Once the unit finishes it’s startup procedure the Mode and Altitude Correction will be displayed.
For Mode changes, press the button when the current mode is displayed under the Setup menu. Each time you press the button, the mode will change. Once the correct mode is displayed, let the unit continue with its startup procedure. When that is complete, your mode will be displayed.
[caption id="attachment_92" align="alignleft" width="444"]
Vigil II Menu Item: Setup[/caption]
