CYPRES2: Altitude Offset

The unit can be set with an altitude offset for a jumper taking off from an elevation that is different from where he will be landing his parachute. Press the button to start the LED flashes. Press the button at each LED flash, but on the third LED flash, press and hold through the entire countdown. Continue holding the button after the 0 is shown as the unit will now start showing different altitudes above and below your takeoff elevation. Once the correct offset altitude is shown, release the button. The unit will now display that offset until the jump is completed or you turn off/on the unit. The offset only lasts one jump. If you are making multiple jumps with the same altitude difference, you must turn the unit on/off inbetween each jump and reset the offset. [caption id="attachment_92" align="alignleft" width="444"]CYPRES2: Altitude Offset CYPRES2: Altitude Offset[/caption]