All manufacturer's skydiving rigs are slightly different, so check this video and description out on how to give a pin check and put all the flaps back in place for your buddy's Seven container.
The reserve pin is checked by opening the reserve pin cover flap. Lift up the reserve pin cover flap, which has tuck flaps on the sides and is tucked down at the bottom. The pin, loop and seal can be checked. To close, tuck the tops of the side tuck flaps first, continue tucking the side flaps and then tuck in the bottom section into the pocket.
The main in pin is checked by opening the main pin cover flap which has a tuck tab at the top. Untuck and check the pin, loop and kill-line window. Reclose by tucking the top tuck flap into the pocket just below the main container top arc.
The AAD display is located on the center, upper back, of the backpad. It may not be visible with the rig on.
[caption id="attachment_92" align="alignleft" width="444"]
Basik Seven: Reserve + Main Pin Check and AAD Display[/caption]
Basik has currently discontinued the manufacturing of the Seven container, but still provides replacement parts.
Basik Seven replacement parts at ChutingStar can be found
at this link, or contact us for any items you need for the container not on our site
at this link.
