The CYPRES2 is waterproof for up to 24 hours down to 5 feet. If the unit gets wet, the filter must be replaced.

You will need a water filter replacement tool from Airtec and a new filter. Place the tool onto the filter and twist counterclockwise to remove the older filter. Dry any remaining water where the water filter is located.

Put new filter on the tool and twist clockwise to install.

Turn unit on to make sure unit starts up properly.

[caption id="attachment_92" align="alignleft" width="444"]CYPRES2: Filter Replacement CYPRES2: Filter Replacement[/caption]

New CYPRES2 Filters available from ChutingStar at this link.

New CYPRES2 Filter Changers available from ChutingStar at this link.