CYPRES: Cutter Replacement

The cutter on a CYPRES2 can be replaced by your local rigger. The cutter should be replaced if damaged and/or if it is fired.

To replace the cutter, turn off the CYPRES2 unit. Unplug the cutter. Plug in the new cutter.

Turn on the unit to make sure the unit start up properly.

Airtec CYPRES2 Cutters available at this link from ChutingStar!

Categories: Skydive Gear, AADs, Parachute Rigging & Gear Maintenance

Tags: CYPRES2 Cutter Replacement, Fired CYPRES2 AAD Cutter, How to replace cutter on CYPRES AAD, Replacing Cutter on CYPRES2 AAD, CYPRES2 AAD Replacement Cutter & Need a new Cypres AAD Cutter

Posted On: July 23 2015

Posted By: Mike Gruwell