Skydive Gear

Skydiving Gear Blog Articles and Expert Advices from the skydiving expert at ChutingStar Skydiving Gear SuperStore!

  1. How to Mount a Magnetic Slider Keeper

    The ChutingStar magnetic slider keeper is mounted to the top of the reserve pin cover flap. The purpose is to hold the slider down behind a jumper’s head after the canopy is open so that the slider doesn’t interfere with cameras, the line of sight and/or allows the risers to open up further. This is not a gadget for all skydivers. Consult with your local DZO, S&TA, instructors and peers before using the ChutingStar Magnetic Slider Keeper. This type of slider keeper can cause a delay during a cutaway if the slider is stowed in the device.
    Continue reading
  2. Magnetic Slider Keeper Info & Use

    A magnetic slider keeper, such as the ChutingStar Magnetic Slider Keeper, is used after you have a fully open and functional canopy. As you watch for canopy traffic, collapse your slider and slowly bring the slider down to the base of the risers, behind your head. Stow the slider between the loop of fabric between the magnets. Release your steering lines and fly your canopy.
    Continue reading
  3. How to Assemble & Use Tube Stows

    Tube Stows by Sun Path Products are made out of silicone tubing. Tube Stows are stronger and last much longer than the rubber bands. The criticism of tube stows is that lines can roll out of the stows and aren’t held as securely…which can lead to deployment issues. Jumpers with canopies more sensitive to packing/line stowage being "just right" should stick with rubber bands. Others have found tube stows to be a great alternative to rubber bands without any drawbacks. Normal installation involves bringing the smooth side around the stow holder and through the seam side. The seam side should also be in the knot without tension when stretched.
    Continue reading
  4. The Wedge Mudflap Altimeter Mount Install

    The ChutingStar Wedge Mudflap Altimeter Mount is the most secure mudflap altimeter mount available. It has three points of connection: vertically through the mudflap, horizontally around the mudflap and then through the chest strap. The Wedge is available in several different configuration depending on your mudflap shape, mudflap size, chest strap size and side you want to intall it on.
    Continue reading
  5. Wedge Assembly with an Analog Altimeter

    To mount an analog altimeter to the Wedge, you will remove the strap and backing plate.
     Use the backing plate to figure out the mounting location on the webbing. Punch holes, if needed, for the screw locations.
    Continue reading
  6. Wedge Assembly with Digital Altimeter

    To mount a digital altimeter to the Wedge, you need the Digipouch kit.
     The Digipouch kit includes the pouch, stiffener for underneath the mounting location and a foam wedge to angle the altimeter toward you.
    Continue reading
  7. Suunto Watch Altimeter A Hit!

    In 2002, several instructors from Skydive Illinois took up residence in Atlanta and made Atlanta Skydiving Center their new home. An influx of new staff of course brings new ideas, skills, attitudes, and even gadgets. And the one gadget that is starting to catch on is the Suunto watch with altimeter. Suunto does not advertise in the skydiving industry, but the altimeter function of its watch is easy to read and operate. It also keeps up with the change of altitude in real time as fast as any other digital altimeter I have ever used. I've since put it in an altitude chamber next to a Neptune2 and found it to be within 100 feet at every moment. Continue reading
  8. Alti-2 N3/N3A Battery Life

    One of the most asked questions on the Alti-2 N3 and N3A is the life of the rechargeable battery. Here's what the company says on the battery lifespan: Continue reading
  9. Alti-2 N3 Audio User Update

    Alti-2, the manufacturer of the N3 Audio has recently investigated customer reported issues with the N3 Audio. Here is what they have found: The maximum power drain of the N3 Audio is higher than the N3, which means that the battery must be in a higher charge state. Continue reading
  10. Slider Blocks: The Slider Keeper Without Rig Attachment

    Past posts on rigging forums at one time focused on one manufacturer's solution to keeping a collapsed slider at the base of the risers after opening without anchoring the slider to the container. Many jumpers have concerns about a number of slider holders that connect the slider to the top of the reserve container, which could potentially cause a cutaway delay. When Team Method (Steve-O Utter, T.J. Landgren and Nate Gilbert) arrived at Atlanta Skydiving Center in 2001, the freefly team showed-off a new slider block design. Over the next few years, ChutingStar riggers tweaked and modified the design for strength, durability and aesthetics. [caption id="attachment_256" align="alignleft" width="399"]Stowed Slider with Slider Blocks Stowed Slider with Slider Blocks[/caption] Continue reading

Items 91 to 100 of 138 total