Trunk's Camera Blow Switch

Trunk's Camera Blow Switch.

A new blow switch manufactured by Trunk of Get Hypoxic!

A blow switch is known for it's durability and ease of use. Trunk's Blow Switch is manufactured in the US by Trunk himself and terminated with a Sony Multi/Micro USB jack or Canon 2.5mm plug. The modular design is easy to install, clean, and service if the need ever arises. Trunk's Blow Switch modular design takes mere seconds to assemble and customize to your helmet. Sensitivity is adjustable via the included jewelry screwdriver.

FEATURES

• Sensitivity is finely adjustable to your preference. Anywhere from hair trigger to gale force sensitivity is just a twist away.
• The mouthpiece stays properly seated with it's curved end. The bend prevents your mouth from being tugged the whole skydive and is easy to locate if it ever becomes dislodged. 
• Hose is made from FDA plastics designed for food and beverage. The clear hose is easy to inspect and can be disconnected for regular sanitizing. In contrast, completely sealed systems are a haven for bacteria growth and will fail prematurely as they get 'gunked' up. 
• The camera cable is modular and therefore only a small hole needs to be drilled into your helmet for installation. This cable can also be swapped if a different orientation is needed or it fails from misuse.
• The pressure sensor is Teflon based and contains no lead like other products on the market. No lead is used in the construction or soldering of this product. 
• A multitude of orientations are available to fit your setup's needs. 
• 1 Year limited warranty.

This blow switch is terminated with a Sony Multi/Micro USB jack or Canon 2.5mm plug. You can choose the Sony jack orientation you would like for your cable. Sensitivity is adjustable via the included jewerler screwdriver.

Sony Multi Terminal Connector Details:

• For compatibility, check that your particular cameras states "Multi Micro USB" not just "micro USB" in the specification. Check the port to ensure you are getting the correct orientation! Compatibility (additional cameras than listed may work too):
• Standard Plug works with NEX-3N, a7(r/s), RX10, SLT-A58, a5000, a5100, a6000
• Flipped Plug works with a7ii, a6300, a6500
• Sideways A works with a7iii, a7riii, A7riv, a9
• Sideways B works with RX0

The 2.5mm Canon Plug is compatible with the following:

Canon EOS 550D, Canon EOS 1000D / 650D / 500D / 450D / 400D / 350D / 300D. Canon EOS Rebel T2i, T3i, T5, Canon Kiss X4, Rebel, Rebel XT, Rebel XTi, Rebel XSi, Rebel XS, Rebel T1i & Canon Powershot G10 Digital SLR Cameras, and the HypEye D Pro Expansion Kit or Photo Kit.