Helmets
-
Bonehead Flat-Top Narrow
$665.00The FLAT-TOP NARROW from Bonehead composites is the trimmed version of the famous FLAT-TOP PRO. The FLAT-TOP NARROW is a great all-around camera helmet for any discipline in skydiving. RW, freefly, tandem video or competition freestyle can be captured with your FLAT-TOP NARROW. This camera helmet is a rear-entry system to give the user better camera stability without sacrificing comfort. This NARROW version of the FLAT-TOP PRO has been made to allow the camera flyer less surface mounting availability and air drag but keeps the stability of the rear-entry configuration. The FLAT-TOP NARROW has plenty of space inside to run wiring, camera buttons, etc. to keep as much of the snagable surfaces to a minimum. You have the choice of where you would like a ring sight post placed.
Learn More | Add to Wishlist | Add to Compare -
Bonehead Flat-Top Pro
$695.00The FLAT-TOP PRO from Bonehead composites is flown by some of the top names in skydiving aerial photography. Norman Kent, Joe Jennings, and Michael McGowan all rely on their FLAT-TOP PRO camera helmets for their versatility, ability to mount multiple cameras and accessories as well as perfect stability and balance of weight. The FLAT-TOP PRO has tons of surface area for you to put almost anything on top of it.
Learn More | Add to Wishlist | Add to Compare -
Vapor Narrow
$567.00The Vapor Narrow by SkySystems USA is the smaller version of the Vapor Wes Pro. It is designed to fit a single video camera on top and room for a front mounted still camera. Design features include the removable liner for easy sizing and camera installation, interior audible pocket, minimal exposure of hardware to reduce snag points, stainless steel hardware and optional quick release option. Flat Top dimensions are 4" x 8" (approx. 10cm x 20cm).
Learn More | Add to Wishlist | Add to Compare -
Vapor Wes-Pro
$750.60The Vapor Wes Pro is built with ultra light weight composite construction. This offers superior strength and great durability.
Learn More | Add to Wishlist | Add to Compare -
Cookie Atomic Helmet
$375.00Cookie's unique Atomic camera helmet features a recessed camera mount plate on the side (the Padlock or Roto Plate) that allows the camera-flyer to adjust the angle of his camera with ease. The Atomic has an important safety feature with an available option of one of the best integrated cutaway systems on the market. It also includes Cookie's shock-absorbent d3o lining.
Learn More | Add to Wishlist | Add to Compare -
Bonehead Mantle
$665.00The Mantle camera helmet is the latest addition to the Bonehead Composites camera helmet arsenal. Bonehead combines the Flat-Top PRO, The Flat-Top Narrow and the BatRak for a camera helmet that has acres of mounting space on the top platform, rear entry and a stout chin for stability.
Learn More | Add to Wishlist | Add to Compare -
Build a Cookie Atomic Helmet
As low as: $375.00
Build out a custom Cookie Atomic Camera Helmet with all the features and extras you want and choose to have it assembled here in shop. Turnaround time is approximately 2 business days. ChutingStar stocks all necessary components to help get in the air as soon as your helmet shows up at your doorstep. Cookie's unique Atomic camera helmet features a recessed camera mount plate on the side (the Padlock or Roto Plate) that allows the camera-flyer to adjust the angle of his camera with ease. The Atomic has an important safety feature with an available option of one of the best integrated cutaway systems on the market. It also includes Cookie's shock-absorbent d3o lining.
Learn More | Add to Wishlist | Add to Compare -
Build a Cookie MXV Helmet
As low as: $340.00
Build out a custom Cookie MXV Camera Helmet with all the features and extras you want and choose to have it assembled here in shop. Turnaround time is approximately 2 business days. ChutingStar stocks all necessary components to help get in the air as soon as your helmet shows up at your doorstep. The MXV Camera Helmet from Cookie Composites is an extremely light-weight and comfortable helmet. The MXV has dual audible altimeter pockets along with a flat top and side for camera mountings. Standard setup with this helmet is the Force Chincup. For those who want a cutaway system Cookie has an available option of one of the best integrated cutaway systems on the market.
Learn More | Add to Wishlist | Add to Compare -
Build a Cookie Ozone Helmet
As low as: $285.00
Build out a custom Cookie Ozone Camera Helmet with all the features and extras you want and choose to have it assembled here in shop. Turnaround time is approximately 2 business days. ChutingStar stocks all necessary components to help get in the air as soon as your helmet shows up at your doorstep. The Ozone open face helmet by Cookie Composites has the cool stylng of the ROK, but the added feature of enclosed the ears, lowered forehead and the latest intelligent shock protection material d3o.
Learn More | Add to Wishlist | Add to Compare -
Build a Cookie ROK Helmet
As low as: $245.00
Build out a custom Cookie ROK Camera Helmet with all the features and extras you want and choose to have it assembled here in shop. Turnaround time is approximately 2 business days. ChutingStar stocks all necessary components to help get in the air as soon as your helmet shows up at your doorstep. With a new aerodynamic design from Cookie Composites, the ROK helmet has been developed to maximize your senses. It is a great open-face helmet for all types of skydiving. The ROK also has the ability to transform into a fully-loaded camera mounting platform for a top-mounted video or still camera. Camera mounts, boxes and a cutaway chincup are available.
Learn More | Add to Wishlist | Add to Compare -
Build a RAWA Image Helmet
As low as: $320.00
Build out a custom RAWA Image Camera Helmet with all the features and extras you want and choose to have it fully assembled. Turnaround time varies from a couple of days when the Rawa helmet/box is in stock to as long as 5 weeks if items need to be manufactured by RAWA.
Learn More | Add to Wishlist | Add to Compare -
Build a RAWA Vision Helmet
As low as: $320.00
Build out a custom RAWA Vision Camera Helmet with all the features and extras you want and choose to have it fully assembled. Turnaround time is varies from a couple of days when the Rawa helmet/box is in stock to as long as 5 weeks if items need to be manufactured by RAWA. ChutingStar stocks all necessary components to help get in the air as soon as your helmet shows up at your doorstep. RAWA's helmets are hands down the most comfortable in the skydiving industry. The Brazilian-based company manufactures the Rawa Vision helmet. This is an open-faced helmet with a chin-cup and two internal audible altimeter pockets. The RAWA Vision comes with a helmet bag. This helmet is a perfect first helmet for any skydiver, especially if you think you may want to add a camera box in the future. The RAWA Vision has a flat top and a smooth left side for RAWA camera box additions. Please select color and size when ordering. The Vision helmet is an update to RAWA's Image helmet, as the company lowered the helmet shell in the forehead area for more head protection. The Vision flattop is a straight-on angle and matches well with a similarly attached side camerabox. The Vision can be setup with the straight-on camera box angle, which better suits freeflyers or more experienced belly cameraflyers. ChutingStar keeps all sizes in a few colors in stock of the Rawa Vision. In-stock colors/sizes will be shipped immediately. If the color/size you order is not in stock, turnaround time is approximately 5 weeks. RAWA sizing: XSmall, less than 21.5", Small, 21.5 inches; Medium, 22-22.5 inches; Large, 23-23.5 inches; XLarge 23.75-24 inches; XXLarge, more than 24 inches. Note: Head measurements in-between RAWA size measurements should take larger size. Additional colors are available on request at no extra charge. Turnaround time on these additional colors is 5 weeks.
Learn More | Add to Wishlist | Add to Compare -
Build a SkySystems NVertigo-V Helmet
As low as: $291.50
Build out a custom SkySystems NVertigo-V Camera Helmet with all the features and extras you want and choose to have it assembled here in shop. Turnaround time is approximately 2 business days. ChutingStar stocks all necessary components to help get in the air as soon as your helmet shows up at your doorstep. The NVertigo-V is the latest camera helmet from SkySystems USA. This unique camera helmet has flat mounting surfaces on the right, left and top. Design features of the NVertigo-V include: dual interior audible pockets, lower forehead coverage for added protection and easier routing of camera indicator lights and ring sights, two flat sides and a flat top platform, and a removable liner made of high impact foam, which allows for easy camera setup. This helmet comes standard with a chin strap and the Sky Cup 2 (to be installed).
Learn More | Add to Wishlist | Add to Compare -
Build a Bonehead Optik 210 Helmet
As low as: $361.00
Build out a custom Bonehead Optik 210 Camera Helmet with all the features and extras you want and choose to have it assembled here in shop. Turnaround time is approximately 2 business days. ChutingStar stocks all necessary components to help get in the air as soon as your helmet shows up at your doorstep. The OPTIK 210 camera helmet from Bonehead Composites features large top and side mounting platforms. The 210 features a concealed chin cup which hides the ladder straps and mounting surfaces for the HypEye D Pro, X-Shut and most other mounts. Looking for an open-faced helmet to bolt all of your cameras to? The OPTIK 210 is the simple answer. Bonehead made the OPTIK 210 to be a great all around camera helmet with the ability to mount cameras either on the side or on the top or both! The OPTIK 210 also features a small lip on the back side of the side camera mounting platform to help deflect "Riser-Strike" and to help prevent the accidental loss of your camera, and the ability to put 1 or 2 audible altimeters on the inside of the helmet. Whether you mount your camera on the top or the side or both, the OPTIK 210 is a great camera helmet setup regardless of what flying position you are in. The OPTIK comes standard with BH's ingenious Thermal-Fit liner. The only things the OPTIK 210 doesn't come with is your creativity, D-Box and cameras! Standard color is a glossy carbon fiber finish. Solid color painting of the helmet from Bonehead is available for $25 extra in colors of blue, teal, purple, navy blue, yellow, green, white, silver, black or red. The Optik is available in sizes of small (21.75"-22.5"), medium (22.5"-22.75"), large (22.75"-23.25"), x-large (23.25"-23.75") and xx-large (23.75" and above). Please indicate size and note color, if anything other than carbon fiber. ChutingStar stocks the Optik 210 in all sizes in a Carbon Fiber finish. A painted finish or out-of-stock size has a 4-week turnaround time.
Learn More | Add to Wishlist | Add to Compare -
Bonehead Drawstring Helmet Bag
$12.00Soft Bonehead Drawstring Helmet Bag for your helmet. This helmet bag from Bonehead is a great carry bag and inexpensive protection for your helmet investment. Fits most helmets.
Learn More | Add to Wishlist | Add to Compare -
Z-1 Full-Face Helmet Bag
$72.00This full-face helmet bag by Para-Sport Italia is constructed of a unique Italian cordura with an embroidered Z-1 logo. This is made for the Z-1 full-face helmet, but can also be used with the Bonehead, Rawa, Cookie and SkySystems USA full-face helmets such as the Mamba, Oxygn, TR, Gas, G3 and Factory Diver.
Learn More | Add to Wishlist | Add to Compare -
Windline Fullface Helmet Bag
$44.95Fullface Helmet Bag by Windline. This soft fullface helmet bag will protect your investment into your new fullface helmet. Includes an inner fleece lining, cordura construction, zipper pocket for accessories and large zipper opening for fullface helmet. Fits all fullface helmet available from ChutingStar. Currently available in black only.
Learn More | Add to Wishlist | Add to Compare -
Cookie Deluxe Helmet Bag
$44.95The Deluxe Helmet bag provides protection for you fullface helmet as well as carrying other items such as gloves, altimeter and wallets etc. Made by Cookie Composites from cordura, complete with hard base and carry handle.
Learn More | Add to Wishlist | Add to Compare -
Cookie Fleece Helmet Bag
$15.00Fleece helmet bag from Cookie. The Cookie Composites Fleece Helmet Bag with drawstring closure has enough room for a complete helmet system and other items like googles, log book and altimeters. It will keep your helmet scratch free when not in use.
Learn More | Add to Wishlist | Add to Compare -
Cookie Camera Gear Cube
$59.00The Camera Gear Cube is a sturdy camera bag designed by Cookie Composites to carry all your camera gear.
Learn More | Add to Wishlist | Add to Compare