Parachute Labs Rigger Kit Bag

This Parachute Labs Rigger Kit Bag is for the "Rigger on the Go" who splits his time between home, the drop zone and/or a rigging loft.

Available as the bag only to fill yourself, or compeletly stocked with just about everything you need!

One Kit. One Bag. Ready to Work

There are 8 large pockets in this Rigger Kit Bag, specifically made to hold rigging tools and materials. Made of Cordura, Parapack, Nylon Webbing, Trim Tape and Zippers. All of the material is durable and resistant to damage, dirt and stains. 

This Rigger Kit Bag is a high-quality bag with just the right number of pockets for the most common rigging tools and extra materials.

The Rigger Kit Bag features include:

• Full length zipper so kit can open flat.
• 4 clear pouch zipper pockets
• 3 long tool pockets
• 1 large velcro pocket for documentation (under tools pockets)
• Weight is 1 pound empty
• 16.5" x 12.5" x 3.5" (closed), 16.5" x 24.5" (opened, laying flat)
• Black outside cordura with grey inner parapack to see tools better

A professional rigger’s tool kit should be more than a collection of random tools. It should be a working system—organized, portable, and capable of supporting the jobs that show up on the packing mat.

The Parachute Laboratories Rigger Kit Bag gives you that foundation with the flexibility to build it out around your specific equipment, AAD systems, manufacturer requirements, and preferred rigging methods. The fully stocked tool kit is designed around sport ram-air rigging. It is intended to give the ram-air rigger the tools needed to address the broad range of tasks encountered during routine parachute maintenance and packing operations.

The kit supports work involving areas such as:

Reserve packing and closing • AAD installation support • Temporary pinning • Closing-loop work • Seal installation • Pilot chute and bridle work • Line and finger-trap work • Inspection • Minor sewing and hand-stitching • Hardware adjustment • Thread and material preparation • General rigging maintenance

Because parachute systems and manufacturer requirements vary, individual tools may be added or substituted where necessary for a particular equipment type or organization.

Included in the fully-stocked kit:

• Rigger's Kit Bag - 1
• Lead Seals - (100 ea) - 1
• Seal Thread, Roll - 1
• Duck Bill Pliers - Smooth - 1
• Adjustable Wrench - 1
• Aluminum Packing Paddle - 1
• AAD Temporary Packing Pin - 1
• T Handle Bodkin - Screw Top - 2
• Finger Trap Wire - Mini, 3-in-2 -  1
• Hemostat - Curved - 1
• Hemostat - Straight - 1
• Lighter - 1
• Professional Needle Kit - Straight & Curved - 1
• Pilot Chute Threading Tool - 1
• Soft Bodkin - 1
• 8" Stainless Steel Shears - 1
• Mundial 5.5" Scissors - 1
• Seam Ripper - 1
• 6" Aluminum Ruler - 1
• Tacking Thread - White - Roll - 1
• Thread Snips - 1
• Ripcord Temporary Pins w/ Flags - Set of 2 - 1
• Positive Leverage Closing Device - Large - 1
• Wooden Packing Paddle - 2
• Angled Tweezers - 1
• Parachute Rigger's Logbook - 1
• Packing Data Cards - 10
• 6" Flat Head Slotted Screwdriver - 1
• Ghost Loop AAD Cutter Threading Tool - 1
• Tape Measure - 1
• Power Tool - PLI - 1
• AAD Loop Material - Small Spool - 1
• "Y" Closing Plate - 1
• Multitool - 1
• 120" Tape Measure - 1
• Needle Case - PLI - 1

Manufactured by Parachute Labs for ChutingStar.

Note: Bag comes in Black/Grey only.