FlySight GPS Anodized Aluminum Mount

FlySight GPS Anodized Aluminum Mount

FlySight GPS Anodized Aluminum Mount
Be the first to review this product
$55
Receive SuperStar$ For Product Reviews!

* Required Fields

$55
- +

Description

FlySight GPS Anodized Aluminum Mount for externally mounting this audible GPS on any helmet.


This updated version of the FlySight Mount includes a wider opening on the edge to allow access to the USB connector, audio jack and switch without removing the FlySight. This aluminum mount is now anodized black too.


This mount has been machined from solid aluminum and anodized black. The mount can be secured to the helmet using the supplied VHB tape, or by inserting screws into the mounting holes.


The FlySight is held in place using a strap and camming buckle, which can be removed when not in use, leaving only the low profile mount on the helmet.


The mount is available in several models, built to fit different helmets. To determine which model fits your helmet, download the sizing guide, and use the included template to mesaure your mounting surface. Or see the information below on known sizes that fit certain helmets.


The mount is currently available in the Flat, 90-90, 110-110, and 141-141 models. Use the sizing guide to determine which model will best fit your helmet.


The following sizes below are known to fit the associated helmets. Some sizes fit multiple helmets and some helmets have a variety of shell shapes, so using the linked sizing guide above is still the most accurate way to the get the correct mount variation for your helmet.



  • Flat (Any Flat-Top or Flat-Side helmet)

  • 90-90 (G3, Pro-Tec, Optik)

  • 110-110 (Factory Diver, Pro-Tec, MXV, Gas)

  • 141-141 (G3, Fuel, KISS, Phantom X/XV, Factory Diver, Mindwarp, Gas, Ozone, MXV, Pro-Tec)


Note: Flysight Audible GPS not included, but can be ordered separetly from ChutingStar.

Detail Information

MaterialNo
Mounting Sides PossibleCenter, Left, Right

Reviews

Add your review

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Video

sizing guide, and use the included template to mesaure your mounting surface. Or see the information below on known sizes that fit certain helmets.

The mount is currently available in the Flat, 90-90, 110-110, and 141-141 models. Use the sizing guide to determine which model will best fit your helmet.

The following sizes below are known to fit the associated helmets. Some sizes fit multiple helmets and some helmets have a variety of shell shapes, so using the linked sizing guide above is still the most accurate way to the get the correct mount variation for your helmet.

  • Flat (Any Flat-Top or Flat-Side helmet)
  • 90-90 (G3, Pro-Tec, Optik)
  • 110-110 (Factory Diver, Pro-Tec, MXV, Gas)
  • 141-141 (G3, Fuel, KISS, Phantom X/XV, Factory Diver, Mindwarp, Gas, Ozone, MXV, Pro-Tec)

Note: Flysight Audible GPS not included, but can be ordered separetly from ChutingStar.

">
FlySight GPS Anodized Aluminum Mount
55
USD