ChutingStar Skydive & Skate Gear Superstore!
Looking for the Skate Shop?
Bonehead AERO Skydiving Helmet
Parasport Z1 SL-14 Skydiving Helmet
Replacement Liner for Bonehead Flat-Top Pro
Phantom XV Skydiving Helmet
Rev2 Replacement Lens
Pro-Tec Fullcut Replacement Liner
Assembled Rawa Vision CX110/150 Side-Mount
Bonehead Rev2 Contour Rail Helmet Mount
Exo Hard Helmet Case
Pro-Tec Classic Skate PLUS Helmet Liner
Bonehead AERO/Rev2 GoPro Helmet Mount
Bonehead Rev2 Skydiving Helmet
Cookie FlySight Mount
Gath Full Retractable Visor Helmet
Sky Shot EVO Skydiving Helmet
EVO Double Ratchet Chincup
Replacement Liner for Cookie FUEL
Cookie Fuel Audible Mount Spare Parts Kit
Cookie G3 GoPro Roller Mount
EVO FlySight Mount
EVO Button Cutaway Kit
EVO Carbon Top Mount & GoPro Attachments
Z-1 Frame, Lens, Bolts
Z-1 Skylight Polycarbonate Lens
Helmet Sizing Explained

Items 1 to 20 of 40 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Ascending Direction
Switch View
  • Cookie G2/G3 Visor Locking Plates

    Cookie G2/G3 Visor Locking Plates

    $20.00

    Replacement G2/G3 Visor Locking Plates.

    Learn More | Add to Wishlist | Add to Compare
  • G2 Foam Breather

    G2 Foam Breather

    $12.00

    The Foam Breather by Cookie Composites reduces fogging issues in the G2 helmet for jumpers who prefer to keep the visor down. The unique design of the G2 allows the user to better communicate by freeing up the area around the mouth. This works well in wind tunnels, freefall and in most environments under canopy. Jumpers in humid or cold climates may choose to put the visor down just before exit and crack the visor up after opening. If you’d prefer to keep the visor down Cookie Composites has manufactured a foam breather to channel your breath out through the front vent in the helmet, much like conventional helmets such as the GAS. The Foam Breather is easily installed in all sizes of the G2. Installation instructions are included with the G2 Foam Breather. The G2 Foam Breather is in stock for immediate shipment from ChutingStar.

    Learn More | Add to Wishlist | Add to Compare
  • Cookie Fleece Helmet Bag

    Cookie Fleece Helmet Bag

    $15.00

    Fleece helmet bag from Cookie. The Cookie Composites Fleece Helmet Bag with drawstring closure has enough room for a complete helmet system and other items like googles, log book and altimeters. It will keep your helmet scratch free when not in use.

    Learn More | Add to Wishlist | Add to Compare
  • Cookie Camera Gear Cube

    Cookie Camera Gear Cube

    $59.00

    The Camera Gear Cube is a sturdy camera bag designed by Cookie Composites to carry all your camera gear.

    Learn More | Add to Wishlist | Add to Compare
  • Cookie Deluxe Helmet Bag

    Cookie Deluxe Helmet Bag

    $44.95

    The Deluxe Helmet bag provides protection for you fullface helmet as well as carrying other items such as gloves, altimeter and wallets etc. Made by Cookie Composites from cordura, complete with hard base and carry handle.

    Learn More | Add to Wishlist | Add to Compare
  • Cookie Dual-Mount Top Plate

    Cookie Dual-Mount Top Plate

    $125.00

    The Cookie Dual-Mount Top Plate was originally engineered for the ROK helmet shown in the photo, but this plate can be installed onto a variety of helmets including the Ozone and MXV. The aluminum plate can fit two Liquid Flatlocks on it side-by-side. The plate is a generic shape and the feet, where it attaches to the helmet, can be adjusted to suit the helmet style and size. This is done by applying making tape to the feet and using a pair of pliers the feet are bent to suit. Note: Helmet and Liquid Flatlocks not included. This order is just for the Top Plate and mounting hardware. The Cookie Dual-Mount Top Plate can be installed on Cookie's range of helmets, including the ROK, Ozone, MXV and Atomic.

    Learn More | Add to Wishlist | Add to Compare
  • Build a RAWA Image Helmet

    Build a RAWA Image Helmet

    As low as: $320.00

    Build out a custom RAWA Image Camera Helmet with all the features and extras you want and choose to have it fully assembled. Turnaround time varies from a couple of days when the Rawa helmet/box is in stock to as long as 5 weeks if items need to be manufactured by RAWA.

    Learn More | Add to Wishlist | Add to Compare
  • Build a Bonehead Optik 210 Helmet

    Build a Bonehead Optik 210 Helmet

    As low as: $361.00

    Build out a custom Bonehead Optik 210 Camera Helmet with all the features and extras you want and choose to have it assembled here in shop. Turnaround time is approximately 2 business days. ChutingStar stocks all necessary components to help get in the air as soon as your helmet shows up at your doorstep. The OPTIK 210 camera helmet from Bonehead Composites features large top and side mounting platforms. The 210 features a concealed chin cup which hides the ladder straps and mounting surfaces for the HypEye D Pro, X-Shut and most other mounts. Looking for an open-faced helmet to bolt all of your cameras to? The OPTIK 210 is the simple answer. Bonehead made the OPTIK 210 to be a great all around camera helmet with the ability to mount cameras either on the side or on the top or both! The OPTIK 210 also features a small lip on the back side of the side camera mounting platform to help deflect "Riser-Strike" and to help prevent the accidental loss of your camera, and the ability to put 1 or 2 audible altimeters on the inside of the helmet. Whether you mount your camera on the top or the side or both, the OPTIK 210 is a great camera helmet setup regardless of what flying position you are in. The OPTIK comes standard with BH's ingenious Thermal-Fit liner. The only things the OPTIK 210 doesn't come with is your creativity, D-Box and cameras! Standard color is a glossy carbon fiber finish. Solid color painting of the helmet from Bonehead is available for $25 extra in colors of blue, teal, purple, navy blue, yellow, green, white, silver, black or red. The Optik is available in sizes of small (21.75"-22.5"), medium (22.5"-22.75"), large (22.75"-23.25"), x-large (23.25"-23.75") and xx-large (23.75" and above). Please indicate size and note color, if anything other than carbon fiber. ChutingStar stocks the Optik 210 in all sizes in a Carbon Fiber finish. A painted finish or out-of-stock size has a 4-week turnaround time.

    Learn More | Add to Wishlist | Add to Compare
  • Build a Cookie Atomic Helmet

    Build a Cookie Atomic Helmet

    As low as: $318.75

    Build out a custom Cookie Atomic Camera Helmet with all the features and extras you want and choose to have it assembled here in shop. Turnaround time is approximately 2 business days. ChutingStar stocks all necessary components to help get in the air as soon as your helmet shows up at your doorstep. Cookie's unique Atomic camera helmet features a recessed camera mount plate on the side (the Padlock or Roto Plate) that allows the camera-flyer to adjust the angle of his camera with ease. The Atomic has an important safety feature with an available option of one of the best integrated cutaway systems on the market. It also includes Cookie's shock-absorbent d3o lining.

    Learn More | Add to Wishlist | Add to Compare
  • Build a Cookie MXV Helmet

    Build a Cookie MXV Helmet

    As low as: $289.00

    Build out a custom Cookie MXV Camera Helmet with all the features and extras you want and choose to have it assembled here in shop. Turnaround time is approximately 2 business days. ChutingStar stocks all necessary components to help get in the air as soon as your helmet shows up at your doorstep. The MXV Camera Helmet from Cookie Composites is an extremely light-weight and comfortable helmet. The MXV has dual audible altimeter pockets along with a flat top and side for camera mountings. Standard setup with this helmet is the Force Chincup. For those who want a cutaway system Cookie has an available option of one of the best integrated cutaway systems on the market.

    Learn More | Add to Wishlist | Add to Compare
  • Build a Cookie Ozone Helmet

    Build a Cookie Ozone Helmet

    As low as: $242.25

    Build out a custom Cookie Ozone Camera Helmet with all the features and extras you want and choose to have it assembled here in shop. Turnaround time is approximately 2 business days. ChutingStar stocks all necessary components to help get in the air as soon as your helmet shows up at your doorstep. The Ozone open face helmet by Cookie Composites has the cool stylng of the ROK, but the added feature of enclosed the ears, lowered forehead and the latest intelligent shock protection material d3o.

    Learn More | Add to Wishlist | Add to Compare
  • Build a Cookie ROK Helmet

    Build a Cookie ROK Helmet

    As low as: $208.25

    Build out a custom Cookie ROK Camera Helmet with all the features and extras you want and choose to have it assembled here in shop. Turnaround time is approximately 2 business days. ChutingStar stocks all necessary components to help get in the air as soon as your helmet shows up at your doorstep. With a new aerodynamic design from Cookie Composites, the ROK helmet has been developed to maximize your senses. It is a great open-face helmet for all types of skydiving. The ROK also has the ability to transform into a fully-loaded camera mounting platform for a top-mounted video or still camera. Camera mounts, boxes and a cutaway chincup are available.

    Learn More | Add to Wishlist | Add to Compare
  • Build a RAWA Vision Helmet

    Build a RAWA Vision Helmet

    As low as: $320.00

    Build out a custom RAWA Vision Camera Helmet with all the features and extras you want and choose to have it fully assembled. Turnaround time is varies from a couple of days when the Rawa helmet/box is in stock to as long as 5 weeks if items need to be manufactured by RAWA. ChutingStar stocks all necessary components to help get in the air as soon as your helmet shows up at your doorstep. RAWA's helmets are hands down the most comfortable in the skydiving industry. The Brazilian-based company manufactures the Rawa Vision helmet. This is an open-faced helmet with a chin-cup and two internal audible altimeter pockets. The RAWA Vision comes with a helmet bag. This helmet is a perfect first helmet for any skydiver, especially if you think you may want to add a camera box in the future. The RAWA Vision has a flat top and a smooth left side for RAWA camera box additions. Please select color and size when ordering. The Vision helmet is an update to RAWA's Image helmet, as the company lowered the helmet shell in the forehead area for more head protection. The Vision flattop is a straight-on angle and matches well with a similarly attached side camerabox. The Vision can be setup with the straight-on camera box angle, which better suits freeflyers or more experienced belly cameraflyers. ChutingStar keeps all sizes in a few colors in stock of the Rawa Vision. In-stock colors/sizes will be shipped immediately. If the color/size you order is not in stock, turnaround time is approximately 5 weeks. RAWA sizing: XSmall, less than 21.5", Small, 21.5 inches; Medium, 22-22.5 inches; Large, 23-23.5 inches; XLarge 23.75-24 inches; XXLarge, more than 24 inches. Note: Head measurements in-between RAWA size measurements should take larger size. Additional colors are available on request at no extra charge. Turnaround time on these additional colors is 5 weeks.

    Learn More | Add to Wishlist | Add to Compare
  • Build a SkySystems NVertigo-V Helmet

    Build a SkySystems NVertigo-V Helmet

    As low as: $291.50

    Build out a custom SkySystems NVertigo-V Camera Helmet with all the features and extras you want and choose to have it assembled here in shop. Turnaround time is approximately 2 business days. ChutingStar stocks all necessary components to help get in the air as soon as your helmet shows up at your doorstep. The NVertigo-V is the latest camera helmet from SkySystems USA. This unique camera helmet has flat mounting surfaces on the right, left and top. Design features of the NVertigo-V include: dual interior audible pockets, lower forehead coverage for added protection and easier routing of camera indicator lights and ring sights, two flat sides and a flat top platform, and a removable liner made of high impact foam, which allows for easy camera setup. This helmet comes standard with a chin strap and the Sky Cup 2 (to be installed).

    Learn More | Add to Wishlist | Add to Compare
  • Sony Action Cam Sleeve
  • Replacement Liner for Ozone

    Replacement Liner for Ozone

    $65.00

    Replacement d3o Liner for the Cookie Ozone Helmet. There are two shell sizes for the Ozone, so make sure your liner is made for the shell size you have. One shell size is for the XS-M Ozone and the other for the L-XXL. Replacement liners available in sizes XS-XXL.

    Learn More | Add to Wishlist | Add to Compare
  • Cookie Cutaway Chinstrap

    Cookie Cutaway Chinstrap

    $89.00

    Cookie Cutaway Chinstrap.

    Learn More | Add to Wishlist | Add to Compare
  • Cookie Fuel Side Plates
  • Cookie Fuel Top Plate Camera Mounts

    Cookie Fuel Top Plate Camera Mounts

    $15.00

    Cookie Fuel Top Plates Camera Mounts

    Learn More | Add to Wishlist | Add to Compare
  • Cookie G3 Skydiving Helmet

    Cookie G3 Skydiving Helmet

    $369.00

    The G3 helmet is the must-have full-face helmet for skydivers and wind tunnel flyers alike. Jumpers rave about the comfort, quality, flip-up lens security, color options and the number of mounting options for the GoPro and Sony Action Cams.

    Learn More | Add to Wishlist | Add to Compare

Items 1 to 20 of 40 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Ascending Direction
Switch View