ChutingStar Skydive & Skate Gear Superstore!
Looking for the Skate Shop?
Rev2 Replacement Lens
Pro-Tec Fullcut Replacement Liner
Assembled Rawa Vision CX110/150 Side-Mount
Bonehead Rev2 Contour Rail Helmet Mount
Exo Hard Helmet Case
Pro-Tec Classic Skate PLUS Helmet Liner
Bonehead Rev2 GoPro Helmet Mount
Bonehead Rev2
Cookie FlySight Mount
Gath Full Retractable Visor
Sky Shot EVO
EVO Double Ratchet Chincup
Replacement Liner for Cookie FUEL
Cookie Fuel Audible Mount Spare Parts Kit
Cookie G3 GoPro Roller Mount
EVO FlySight Mount
EVO Button Cutaway Kit
EVO Carbon Top Mount & GoPro Attachments
Z-1 Frame, Lens, Bolts
Z-1 Skylight Polycarbonate Lens
Cookie Fuel Top Plate Camera Mounts
Cookie Fuel Side Plates
Cookie Cutaway Chinstrap
Replacement Liner for Atomic
Helmet Sizing Explained

Items 1 to 20 of 111 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Ascending Direction
Switch View
  • Replacement Top Plate for Flat-Top Pro

    Replacement Top Plate for Flat-Top Pro

    $66.00

    Replacement top plate for Flat-Top Pro. The top plates, by Bonehead Composites, are made of carbon fiber, and are available in three different sizes.

    Learn More | Add to Wishlist | Add to Compare
  • Cookie Dual-Mount Top Plate

    Cookie Dual-Mount Top Plate

    $125.00

    The Cookie Dual-Mount Top Plate was originally engineered for the ROK helmet shown in the photo, but this plate can be installed onto a variety of helmets including the Ozone and MXV. The aluminum plate can fit two Liquid Flatlocks on it side-by-side. The plate is a generic shape and the feet, where it attaches to the helmet, can be adjusted to suit the helmet style and size. This is done by applying making tape to the feet and using a pair of pliers the feet are bent to suit. Note: Helmet and Liquid Flatlocks not included. This order is just for the Top Plate and mounting hardware. The Cookie Dual-Mount Top Plate can be installed on Cookie's range of helmets, including the ROK, Ozone, MXV and Atomic.

    Learn More | Add to Wishlist | Add to Compare
  • SkySystems Chincup Quick Release Kit

    SkySystems Chincup Quick Release Kit

    $32.95

    The SkySystems USA Quick Release kit can be installed on any chincup, as well as on the Vapor Wes Pro and Vapor Narrow. This Quick Release Kit is a cutaway option that can be used in an entanglement emergency to release your helmet from your head.

    Learn More | Add to Wishlist | Add to Compare
  • Replacement Liner for Mamba

    Replacement Liner for Mamba

    $45.00

    Replacement Liner for the Mamba Helmet. There are three shell sizes for the Mamba, so make sure your liner is made for the shell size you have. Replacement liners available is sizes XS-XXL. Shell size 1 can take the XSmall liner. Shell size 2 can take the Small, Medium and Large liners. Shell size 3 can take the XLarge and XXLarge liners. The Bonehead sizing guide can be found at this link. This is a factory replacement liner from Bonehead Composites.

    Learn More | Add to Wishlist | Add to Compare
  • Replacement Lens for Oxygn

    Replacement Lens for Oxygn

    $31.00

    Replacement lens for the Oxygn, Oxygn A3 and Sidewinder2 full-face helmets by Sky Systems. All replacement lenses have an anti-fog and anti-scratch coating. ChutingStar also stocks the clear and tinted replacement lenses.

    Learn More | Add to Wishlist | Add to Compare
  • Gath Audible Altimeter Bracket Kit

    Gath Audible Altimeter Bracket Kit

    $21.95

    Audible altimeter bracket kit for Sport Hat & Retractable Visor helmets by Gath. This bracket and cover for audible altimeters fits over right ear only. For Gath Sport Hat and Retractable Visor models.

    Learn More | Add to Wishlist | Add to Compare
  • Z-1 Replacement Bolts

    Z-1 Replacement Bolts

    $26.95

    Two replacement Z-1 Flip-Up Visor Bolts. These are the latest bolt version from Para-Sport Italia for all Z-1 helmets.

    Learn More | Add to Wishlist | Add to Compare
  • Replacement Sideplates, Screws for Oxygn & A3 helmets

    Replacement Sideplates, Screws for Oxygn & A3 helmets

    $23.95

    This is a set of two replacement sideplates and 4 screws for the A3 or Oxygn helmets manufactured by SkySystemsUSA. The Sideplate and Screw set, black, are in stock for immediate shipment from ChutingStar. Includes allen wrench.

    Learn More | Add to Wishlist | Add to Compare
  • Cookie G2/G3 Visor Locking Plates

    Cookie G2/G3 Visor Locking Plates

    $20.00

    Replacement G2/G3 Visor Locking Plates.

    Learn More | Add to Wishlist | Add to Compare
  • REvolve Contour Camera Mount

    REvolve Contour Camera Mount

    $60.00

    The REvolve Contour Camera Mount allows you to add the Contour series of cameras to the side of your helmet such as the Contour1080p, ContourGPS or Contour+. Bonehead Composites now offers a mounting solution for the contour camera and standard side mounts. Consists of a plastic Derlin plate and machined aluminum rail which slides into the contour rail guides and allows visor rotation and level adjustments. The REvolve Contour Camera Mount is sized per the shell/visor size. Select your REvolve size above when ordering. Note: Mount does not include Contour camera, which is available separately from ChutingStar.com. Mounting instructions 1. Remove original visor pin from the left side of the helmet. 2. Place a piece of masking tape over each raise mounting pad on the REvolve. 3. Using the longer pin supplied with the contour mount, slide the pin through the upper plate hole through the visor grommet and finally into the helmet and secure. 4. Rotate the plate, centering the middle or each lower mounting slots over the center of each mounting pad. Mark these locations with a pen and then check for center accuracy. 5. Using a 8/32 drill or Dremel tool drill the center marks through the helmet. 6. Secure the lower contour mount with supplied hardware with washers under both the screw head and nut. 7. Minor up/down adjustments can be obtain by loosening the lower screws and slightly rotating the plate to the fore or aft slot positions. Most sizes of the REvolve Contour Camera Mount are in stock for immediate shipment from ChutingStar.com.

    Learn More | Add to Wishlist | Add to Compare
  • Factory Diver Replacement Lens

    Factory Diver Replacement Lens

    $28.50

    Replacement lens for the Factory Diver and Sidewinder full-face helmet by SkySystems USA. All replacement lenses have an anti-fog and anti-scratch coating. We stock the clear and tinted replacement lenses.

    Learn More | Add to Wishlist | Add to Compare
  • Havok Replacement Lens

    Havok Replacement Lens

    $25.00

    Replacement lens for the Havok full-face helmet by Bonehead Composites. This is a clear Lexan Anti-Fog coated lens. The Havok replacement lens is always in stock at ChutingStar!

    Learn More | Add to Wishlist | Add to Compare
  • G3/G2 Dual Camera Mounting Platform

    G3/G2 Dual Camera Mounting Platform

    $120.00

    Upgrade your Cookie Composite G3 or G2 helmet to a professional helmet setup with this sleek, sturdy, and lightweight billet aluminum mounting platform by HYPOXIC.

    Learn More | Add to Wishlist | Add to Compare
  • Mamba Replacement Lens

    Mamba Replacement Lens

    $27.00

    Replacement lens for the Mamba full-face helmet by Bonehead Composites. This is a clear Lexan Anti-Fog coated lens. The Mamba replacement lens is always in stock at ChutingStar!

    Learn More | Add to Wishlist | Add to Compare
  • Z-1 Full-Face Helmet Bag

    Z-1 Full-Face Helmet Bag

    $72.00

    This full-face helmet bag by Para-Sport Italia is constructed of a unique Italian cordura with an embroidered Z-1 logo. This is made for the Z-1 full-face helmet, but can also be used with the Bonehead, Rawa, Cookie and SkySystems USA full-face helmets such as the Mamba, Oxygn, TR, Gas, G3 and Factory Diver.

    Learn More | Add to Wishlist | Add to Compare
  • Cookie Camera Gear Cube

    Cookie Camera Gear Cube

    $59.00

    The Camera Gear Cube is a sturdy camera bag designed by Cookie Composites to carry all your camera gear.

    Learn More | Add to Wishlist | Add to Compare
  • Windline Fullface Helmet Bag

    Windline Fullface Helmet Bag

    $44.95

    Fullface Helmet Bag by Windline. This soft fullface helmet bag will protect your investment into your new fullface helmet. Includes an inner fleece lining, cordura construction, zipper pocket for accessories and large zipper opening for fullface helmet. Fits all fullface helmet available from ChutingStar. Currently available in black only.

    Learn More | Add to Wishlist | Add to Compare
  • Cookie Deluxe Helmet Bag

    Cookie Deluxe Helmet Bag

    $44.95

    The Deluxe Helmet bag provides protection for you fullface helmet as well as carrying other items such as gloves, altimeter and wallets etc. Made by Cookie Composites from cordura, complete with hard base and carry handle.

    Learn More | Add to Wishlist | Add to Compare
  • Build a Cookie Atomic Helmet

    Build a Cookie Atomic Helmet

    As low as: $318.75

    Build out a custom Cookie Atomic Camera Helmet with all the features and extras you want and choose to have it assembled here in shop. Turnaround time is approximately 2 business days. ChutingStar stocks all necessary components to help get in the air as soon as your helmet shows up at your doorstep. Cookie's unique Atomic camera helmet features a recessed camera mount plate on the side (the Padlock or Roto Plate) that allows the camera-flyer to adjust the angle of his camera with ease. The Atomic has an important safety feature with an available option of one of the best integrated cutaway systems on the market. It also includes Cookie's shock-absorbent d3o lining.

    Learn More | Add to Wishlist | Add to Compare
  • Build a Bonehead Optik 210 Helmet

    Build a Bonehead Optik 210 Helmet

    As low as: $361.00

    Build out a custom Bonehead Optik 210 Camera Helmet with all the features and extras you want and choose to have it assembled here in shop. Turnaround time is approximately 2 business days. ChutingStar stocks all necessary components to help get in the air as soon as your helmet shows up at your doorstep. The OPTIK 210 camera helmet from Bonehead Composites features large top and side mounting platforms. The 210 features a concealed chin cup which hides the ladder straps and mounting surfaces for the HypEye D Pro, X-Shut and most other mounts. Looking for an open-faced helmet to bolt all of your cameras to? The OPTIK 210 is the simple answer. Bonehead made the OPTIK 210 to be a great all around camera helmet with the ability to mount cameras either on the side or on the top or both! The OPTIK 210 also features a small lip on the back side of the side camera mounting platform to help deflect "Riser-Strike" and to help prevent the accidental loss of your camera, and the ability to put 1 or 2 audible altimeters on the inside of the helmet. Whether you mount your camera on the top or the side or both, the OPTIK 210 is a great camera helmet setup regardless of what flying position you are in. The OPTIK comes standard with BH's ingenious Thermal-Fit liner. The only things the OPTIK 210 doesn't come with is your creativity, D-Box and cameras! Standard color is a glossy carbon fiber finish. Solid color painting of the helmet from Bonehead is available for $25 extra in colors of blue, teal, purple, navy blue, yellow, green, white, silver, black or red. The Optik is available in sizes of small (21.75"-22.5"), medium (22.5"-22.75"), large (22.75"-23.25"), x-large (23.25"-23.75") and xx-large (23.75" and above). Please indicate size and note color, if anything other than carbon fiber. ChutingStar stocks the Optik 210 in all sizes in a Carbon Fiber finish. A painted finish or out-of-stock size has a 4-week turnaround time.

    Learn More | Add to Wishlist | Add to Compare

Items 1 to 20 of 111 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Ascending Direction
Switch View