don't forget about
TheRock2 G3 G4 GoPro Camera Mount Kit.
TheRock2 is a snag resistant mount made to fit any combination of the Hero 5,6,7,8 on the G3 or G4 full face helmets.
- Access the battery and card without removing the camera from the base on the Hero8 (Hero7 still must be removed from GoPro frame).
- Easy installation only requires 2 small machine screws.
- Drilling holes in the G4 does void impact rating as stated by manufacturer. See installation tutorial for more info.
- Installation kit is included (Jig, Bit, template, bolt, video tutorial). User must provide a drill, phillips screwdriver, and flex tape or piece of string.
- Angle marks to make quick, reliable, repeatable camera angle adjustments.
- Is removable in seconds for tunnel flying, quickly reinstalled all without having to even remove the camera from the base.
- Secure angle locking.
- Manufactured from layers of Nylon and Carbon fiber for the highest possible durability.
- Ongoing support provided by the manufacturer (Collette Tech), known for great service and maintaining replacement parts.
TheRock2 is a more traditional non-cutaway mount. However, it still packs some features not seen in other mounts. While it is a very snag resistant design, the mount also includes detentes. These detentes make the angle setting very rigid. You shouldn't be hitting your camera on the exit but let's face it, it happens. This mount will not only reduce snagging hazard but also maintain that perfect angle setting if it does get bumped.
Along with the detentes, there are angle setting marks on the side of the mount. If removing the mount and reinstalling later, your preferred angle setting is easily and quickly repeatable. Checking camera angle on jump run? We all do it....the angle markings quickly let you know that it is set properly.
Because of the rigid angle setting and repeat-ability of the install, some more serious jumpers who film with full face setups have placed a dot on the visor (with something such as a small round sticker) in lieu of a ring sight that you would see on full professional setups. This is great for camera flyers getting outside video on fun jumps, video of team jumps, training jumps, etc. or any jump where you want to ensure you get the shot but don't need or want a full camera setup.
Install with this mount is also a breeze. The kit comes with all necessary hardware including an appropriately sized drill bit and proper alan keys. All you need to provide is a drill to make two small holes for the mounting bolts. Two small bolts through the base and one through the camera case have this mount ready to go to work.
This mount is intended to fit the Cookie G3 or G4 helmets only with the HERO 2018, HERO5, HERO6, HERO7 or HERO8 Black GoPro cameras (select version above).
- This model is intended to fit the Hero5/Hero6/Hero7 dive housing and will also fit the Hero5/Hero6/Hero7 Black frame. This model will also fit the Hero3/Hero4 but only if using the slimline housing.
- Fits camera without any extra housing
- Access the battery and card without removing the camera from the base.
Note: GoPro Housings shown in photos are for demonstration purposes and are not included. The housings are available separately from ChutingStar.
G4 Note: The G4 Helmet is certified to a Skydiving and Wind Tunnel Helmet Standard. To achieve this standard, helmets must pass Impact and Snag Resistance testing. While this mount base is a good fit against the top surface of the G4, it was not tested according to the XP S 72-600 Standard. Cookie believes that having a camera mount fitted to the G4 helmet would forgo the Snag Test in this standard. It is up to the user to decide whether to mount a camera to the G4 helmet knowing that by doing so, it could affect the way the helmet performs when tested to the XP S 72-600 Standard. Since Cookie knows many users will assume the risk of adding mounts onto the G4, they have included a trap-door cutout in the EPP foam for the user to gain access to the top of the shell to add mounts such as this one.
Detail InformationColors AvailableBlackHardware IncludedYesMount Positions AvailableTopHelmet SpecificYesVariable AnglesYesFlush MountOffsetCurved AdaptorFits a curved surfaceFits Dual CamerasNoQuick ReleaseNoSizeNo
ReviewsAdd your review
Customer Reviews 1 item(s)
- Great Mount
Easy to position and install. The mount is super light and feels very durable. The material feels more rigid than the older models. The angle adjustments are made by slotting the mount into place. This takes a little more time but ensures the camera stays on angle. I've done a handful of jumps- belly, head up, head down, back, and banged it on the door and inside of the plane- so far no issues.
Quality Durability Price
check these out!×Price:Actual Price:The advertised price above is higher than the actual price for this item. Add this item to your cart to see your price. Contact us if you have any further questions on this item.The advertised price is higher than the actual price for this item. Add this item to your cart to see your price. Contact us if you have any further questions on this item.