Cookie FlySight Mount

Cookie FlySight Mount

Cookie FlySight Mount
Be the first to review this product
Receive SuperStar$ For Product Reviews!
- +


The Cookie FlySight Mount for externally mounting this audible GPS.

This FlySight Mount fits the G3, G4, Fuel and other similar shaped helmets.

The FlySight Mount is mounted with 4 screws, while the Flysight is held in place using an elastic bungee. The shape of this mount allows access to the USB jack, 3.5mm jack and on/off button.

The Flysight can be removed when not in use, leaving only the mount on the helmet.

Developed by Cookie for the G3 helmet with help from Jay Moldeski. Primarily it was designed around the profile of the G3 helmet however it will fit similar profiled helmets like the G4 and Fuel. The best way to install is to position the mount for the best location before getting the drill out to drill the mounting holes.

Note: Flysight Audible GPS not included, but can be ordered separetly from ChutingStar.

G4 Note: The G4 Helmet is certified to a Skydiving and Wind Tunnel Helmet Standard. To achieve this standard, helmets must pass Impact and Snag Resistance testing. While the FlySight Mount is a good fit against the top surface of the G4, it was not tested according to the XP S 72-600 Standard. Cookie believes that having a FlySight fitted to the G4 helmet would forgo the Snag Test in this standard. It is up to the user to decide whether to mount a FlySight to the G4 helmet knowing that by doing so, it could affect the way the helmet performs when tested to the XP S 72-600 Standard. Since Cookie knows many users will assume the risk of adding mounts onto the G4, they have included a trap-door cutout in the EPP foam for the user to gain access to the top of the shell to add the FlySight Mount.

Detail Information

Mounting Sides PossibleCenter


Add your review

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Customer Reviews 6 item(s)

Mounts only on top of G4, not back.
Great product, BUT..... I ordered it for the G4 at the same time I ordered a G4 and found out the hard way that this can not be mounted to the back of the helmet above the vents unless you were to chissel out the hard foam in the helmet. So, if you are getting this for a G4, know that it is either this or a camera mount, unless you seriously want to modify your helmet.
Review by RonaJumpin / (Posted on 6/10/2020)
Perfect mount
Easy to install (use BBAG's advice in the other review if you're u sure about it.)

Seems to be very well made. It fits onto the back of my Bonehead Rev2 very well.
Review by FlyWingsuits! / (Posted on 3/24/2019)
Fits my Cookie G3 and FlySight great!
The mount fit the curved surface of my Cookie G3 perfectly. The FlySight fits very snug inside of it and it also fits perfectly. The elastic strap is tight enough that I am not worried about losing the FlySight.

I believe the durability of the mount is sufficient. You are mounting a piece of electronics in it, so certainly you are not planning on high impact to it.

It is not difficult to mount if you are not a moron. This is the approach I recommend:
1. Remove the liner, pads, etc from inside of helmet.
2. Place wide making tape on your helmet where you want the mount.
3. Place the mount on top of the masking tape.
4. Push the tip of a black Sharpie thru the 4 holes of the mount.
5. Using the mount as a guide, find the largest drill bit that will fit thru the mount's holes.
6. Set the mount aside and drill the 4 holes on the 4 black dots.
7. Remove the masking tape. Place the mount. Put the screws thru the holes and attach.
8. Replace the liner, pads, etc.
Review by BBAG / (Posted on 12/17/2018)
Not worth the money, hard to install
Easy to break during installation, hard to match external and internal parts when assembling. Strongly advise an adhesive mount.
Review by Alexey / (Posted on 10/22/2017)
Easy install
Works perfect with Cookie Fuel or G3. Very easy to install.
Review by Thomas / (Posted on 2/20/2017)
Easy to install, works perfectly.
Easy to install, works perfectly with my Cookie G3 and flysight.
Review by olee / (Posted on 11/7/2015)


Cookie FlySight Mount
Post your comment

ChutingStar Enterprises Inc.