GrellFAB GoPro Phantom X Front Mount

GrellFAB GoPro Phantom X Front Mount

GrellFAB GoPro Phantom X Front Mount
Be the first to review this product
$125
Receive SuperStar$ For Product Reviews!
This Housing Mount requires the GoPro Housing (not included) to mount to the GrellFAB Mount.

Description

GrellFAB GoPro Phantom X Front Mount.


The most unique, simple and safe way to mount a GoPro to your Phantom X Helmet! The GrellFAB GoPro Phantom X Front Mount is secured to the helmet at the grill section of the helmet. The placement of the GoPro allows the user to see the camera from above, and can see if it's on without being in the video.


An integrated cutaway handle sits on the bottom of the mount under the jumper's chin. 


Current model GoPro units that can be used with the GrellFAB GoPro Phantom X Mount include:



  • All Sessions

  • HERO5

  • HERO6

  • HERO7

  • HERO 2018


Specfic model available:


GF1127 GoPro Session HERO5 HERO6 HERO7 Black HERO2018 Housing Mount



  • Mounts GoPro Session, HERO2018, HERO5 Black, HERO6 Black or HERO7 Black to Phantom X helmet

  • Adjustable camera angle (30 degrees up / 30 degrees down). Adjustable angle makes perfect for all round skydiving. Use it for belly, freefly, tracking, VFS, wingsuit etc.

  • Works as a back door for the  HER05/6/7-frame

  • When using Session with this mount you will need the Low-profile frame. If it is not included in your session package you can find it here.

  • No drilling, modification of helmet or glue required.

  • Uses standard stow bands.

  • Integrated cut-away system.

  • Flexible suspension gives a vibration free, rugged and durable system sustainable to shock.

  • Installation instructions below.


Note: This mount only works with the Phantom X helmet. It does not work with the Phantom XV helmet. See the separate listing for the Phantom XV GrellFab GoPro Mount.


Phantom X step-by-step mounting instructions:


  • Set up anchor, rubber bands and pull-up cord so that when you pull the cord the bands are folded over the anchor mid section bar.

  • Place anchor on the inside of the helmet by guiding the cord through the air vent, from inside the helmet and out.

  • Align the anchor horizontally.

  • Pull the cord to exercise the rubber bands. You should see them coming out through the air vent..

  • Take the mount and thread it on the cord.

  • Place one foot in the helmet for support and pull the cord with one hand. Pull hard so that there is enough clearance for the pin to be inserted.

  • With the other hand insert the pin through the rubber band loop the same way as the cord.

  • While holding the rubber band tightened, hook the pin in the mount slot. The easy way is to move the mount to the pin. (Can be tricky)

  • Turn the mount back in position and let go.

  • Carefully remove the cord.

  • Make sure the mount is guided in the slots in the mouth piece. You might have to apply some pressure. There is supposed to be a tight fit between the mount and the helmet.


GrellFAB Mount Assembly Instructions

Detail Information

Colors AvailableBlack
Hardware IncludedYes
Mount Positions AvailableFront
Helmet SpecificYes
Variable AnglesYes
Flush MountOffset
Curved AdaptorNo
Fits Dual CamerasNo
Quick ReleaseYes
SizeNo

Reviews

Add your review

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Customer Reviews 4 item(s)

Probably get a different Mount
Not too bad to install. If you bump it, it comes out of alignment very easily. Doesn't feel very solid. Had a friend lose the whole mount and his camara the 2nd jump with it. Good quality, but moves and can come off to easily.
Quality
Durability
Price
Review by BJones / (Posted on 2/19/2019)
Decent product with no installation instructions
No instructions and an incredible pain to install. The instructions on the site are not for the Phantom and after two hours of guessing how it goes together it finally made sense. Also, there is no way the stow bands that come with it will fit. Once all these hurdles were crossed, it seems it will do the job well, but it's a trip to get there.
Quality
Durability
Price
Review by Cory / (Posted on 5/11/2017)
I like it
The chin mount location gives a better view of what you actually see. I feel a bit more confident knowing it's less of a snag hazard and if it does get caught in something, there's a cut-away handle. I've had one or two glancing blows and the camera remained in solid alignment. Another added bonus is that I can see the flashing "Recording" light on the top of the Gopro and know I'm rolling. It's a bit of a challenge to install the first time, but not as bad as some of the reviews I've read. It's working out great.
Quality
Durability
Price
Review by Mike / (Posted on 11/29/2015)
Poor
Really difficult to mount!!! Shredded and replaced 1 rubber band after numerous attempts to mount it to my PhantomX. The Gellfab mount crudely fits the outer mouthpiece grill, consequently its very easy to knock the GoPro out of alignment. Hope I don't lose my new cameral. Hope it works better on the G3!
Quality
Durability
Price
Review by Stephen / (Posted on 5/21/2015)

Video

Note: This mount only works with the Phantom X helmet. It does not work with the Phantom XV helmet. See the separate listing for the Phantom XV GrellFab GoPro Mount.

Phantom X step-by-step mounting instructions:
  • Set up anchor, rubber bands and pull-up cord so that when you pull the cord the bands are folded over the anchor mid section bar.
  • Place anchor on the inside of the helmet by guiding the cord through the air vent, from inside the helmet and out.
  • Align the anchor horizontally.
  • Pull the cord to exercise the rubber bands. You should see them coming out through the air vent..
  • Take the mount and thread it on the cord.
  • Place one foot in the helmet for support and pull the cord with one hand. Pull hard so that there is enough clearance for the pin to be inserted.
  • With the other hand insert the pin through the rubber band loop the same way as the cord.
  • While holding the rubber band tightened, hook the pin in the mount slot. The easy way is to move the mount to the pin. (Can be tricky)
  • Turn the mount back in position and let go.
  • Carefully remove the cord.
  • Make sure the mount is guided in the slots in the mouth piece. You might have to apply some pressure. There is supposed to be a tight fit between the mount and the helmet.

GrellFAB Mount Assembly Instructions

">
  • you can find it here.
  • No drilling, modification of helmet or glue required.
  • Uses standard stow bands.
  • Integrated cut-away system.
  • Flexible suspension gives a vibration free, rugged and durable system sustainable to shock.
  • Installation instructions below.
  • Note: This mount only works with the Phantom X helmet. It does not work with the Phantom XV helmet. See the separate listing for the Phantom XV GrellFab GoPro Mount.

    Phantom X step-by-step mounting instructions:
    • Set up anchor, rubber bands and pull-up cord so that when you pull the cord the bands are folded over the anchor mid section bar.
    • Place anchor on the inside of the helmet by guiding the cord through the air vent, from inside the helmet and out.
    • Align the anchor horizontally.
    • Pull the cord to exercise the rubber bands. You should see them coming out through the air vent..
    • Take the mount and thread it on the cord.
    • Place one foot in the helmet for support and pull the cord with one hand. Pull hard so that there is enough clearance for the pin to be inserted.
    • With the other hand insert the pin through the rubber band loop the same way as the cord.
    • While holding the rubber band tightened, hook the pin in the mount slot. The easy way is to move the mount to the pin. (Can be tricky)
    • Turn the mount back in position and let go.
    • Carefully remove the cord.
    • Make sure the mount is guided in the slots in the mouth piece. You might have to apply some pressure. There is supposed to be a tight fit between the mount and the helmet.

    GrellFAB Mount Assembly Instructions

    ">
    GrellFAB GoPro Phantom X Front Mount
    125
    USD
    Post your comment

    ChutingStar Enterprises Inc.