This replacement screw-in lens is suitable for the FT60 or the FT50/FT60 combo altimeters from Viplo.
This is a clear lens and is easy to install. It is important not to push down on the lens when you are removing the old lens or inserting a new one, pushing down locks the lens into the thread and makes it difficult to turn. If you have any problem in removing a lens we suggest you use a "sticky pad" such as the type used for removing the lids of jars.
For the FT60 or FT50/FT60, you can also take off the back plate to remove the altimeter from the inside and grip both sides of the lens to remove and install. Then just put the altimeter and back plate back together before use.
Replacement lenses are always in stock at ChutingStar!
This is a clear lens and is easy to install. It is important not to push down on the lens when you are removing the old lens or inserting a new one, pushing down locks the lens into the thread and makes it difficult to turn. If you have any problem in removing a lens we suggest you use a "sticky pad" such as the type used for removing the lids of jars.
For the FT60 or FT50/FT60, you can also take off the back plate to remove the altimeter from the inside and grip both sides of the lens to remove and install. Then just put the altimeter and back plate back together before use.
Replacement lenses are always in stock at ChutingStar!
Additional Info
| Manufacturer | Viplo |
|---|
You may also be interested in the following product(s)
Related Products
Check items to add to the cart or select all
My Cart
You have no items in your shopping cart.
Newsletter
Compare Products
You have no items to compare.
Community Poll