This is a thick elastic bungee, plastic ball and rubber band that can be used to hold your main slider at the base of the main risers, behind your head. The bungee length will need to be adjusted when installed on your rig. This system works with the Javelin, Mirage, Icon, Dolphin, Basik and Vector rigs.
The bungee is slid around the reserve pin cover flap and tightened near the yoke with the rubber band and ball at the center. Once your canopy is deployed and determined to be square, stable and steerable, your collapsed slider can be secured with the rubber band wrapped around the middle of the slider and hooked onto the plastic ball.
Although the rubber band should break in the event of a cutaway, this system can cause a slight delay, so use at your own risk. We urge you to make sure you have a good canopy before securing your slider in the bungee/ball retainer.
The Bungee/Ball Slider Keeper is always in stock at ChutingStar for immediate shipment!
Note: Colors may change due to stock on hand. Currently we have black and red elastic with a black ball.
The bungee is slid around the reserve pin cover flap and tightened near the yoke with the rubber band and ball at the center. Once your canopy is deployed and determined to be square, stable and steerable, your collapsed slider can be secured with the rubber band wrapped around the middle of the slider and hooked onto the plastic ball.
Although the rubber band should break in the event of a cutaway, this system can cause a slight delay, so use at your own risk. We urge you to make sure you have a good canopy before securing your slider in the bungee/ball retainer.
The Bungee/Ball Slider Keeper is always in stock at ChutingStar for immediate shipment!
Note: Colors may change due to stock on hand. Currently we have black and red elastic with a black ball.
Additional Info
| Manufacturer | ChutingStar |
|---|





