Altimeters can be hard-mounted to the carbon fiber mount by drilling holes to match the altimeter back plate screws.
The Bungee/Ball Slider Keeper is a tent tie-down that can be modified to use as a slider keeper at the top of your reserve pin cover flap. The purpose of this slider keeper is to hold the slider down behind a jumper’s head after the canopy is open so that the slider doesn’t interfere with cameras, the line of sight and/or allows the risers to open up further. This is not a gadget for all skydivers. Consult with your local DZO, S&TA, instructors and peers before using the Bungee/Ball Slider Keeper. This keeper can cause a delay during a cutaway if the slider is stowed in the device.
The Cargo Pack Gear Bag can hold most rigs upto a 210 main size along with a few accessories such as a jumpsuit, altimeters and logbook.
Curv Z are a great piece of basic skydiving eyewear. If using the standard retainers that are included with the Curv Z sunglasses, superglue the rubber tips on for extra security.
To adjust and set your elastic strap on your Flex Z goggles, first pull the strap to your desired length. Make a double-hand overhand knot, followed by a single overhand knot.
Gatorz glasses are made out of 7075 Billet Aircraft Aluminum with polycarbonate lenses. These glasses can be bent/shaped for your head shape and desired fit. Just apply even, firm pressure to the part you want to shape. Keep trying the glasses on until you find the desired fit.
To replace the Power Tool pullup cord, remove the old cord.
The SkyTie magnetic slider keeper is mounted to the top of the reserve pin cover flap. The purpose of the SkyTie is to hold the slider down behind a jumper’s head after the canopy is open so that the slider doesn’t interfere with cameras, the line of sight and/or allows the risers to open up further.
The SkyTie is used after you have a fully open and functional canopy.
Want ChutingStar at your event?Click here for more info