Custom Tonfly TFX Full Face Helmet

Custom Tonfly TFX Full Face Helmet

Custom Tonfly TFX Full Face Helmet
Be the first to review this product
Receive SuperStar$ For Product Reviews!
TFX orders can be completed in-store with our Tonfly Fitting Kit or by following the measuring guide in the description below.
Click For Help Choosing The Right Full Face Skydiving Helmet For You!

Allowed file extensions to upload: .jpg, .tif, .pdf, .jpeg

Maximum number of characters: 100

Maximum number of characters: 100

Maximum number of characters: 100

* Required Fields

- +


Custom Tonfly TFX Full Face Helmet.

A next generation helmet by Tonfly especially developed for high speed flight.

TFX is the first Full Face Helmet made by Tonfly, as a result of intense Research and Development. It was developed to have the tightest fit and stability possible even at very high speeds.

The main reason behind the decision of developing a modular helmet and the flip chin, is simply to being able to fit in it, otherwise it would not be possible. Once the helmet is on, it is possible to keep just the visor open.

TFX is engineered to have a tight fit that protects from the base of the head and covers all around the neck. Tonfly simply wanted a small, protective helmet, made out of the highest quality materials.The flip chin also allows to communicate easily without taking off the helmet, such as for quick debriefs between tunnel sessions.

You only need one hand to open the visor or the chin piece. The visor opens by pushing the hook out and up with your thumb. Thin chin piece opens by pushing the button down with your index finger as you lift the chin up with your thumb.

The modular lining system of the TFX allows the tightest fit and combines maximum comfort with great stability giving you real protection from the base of the head up. The TFX lining is made with top quality antiallergic materials. The lining is removable and washable.

Tonfly's TFX is protective for real. The shock absorbing EPS liner keeps your head safe. The shock absorbing EPS liner is combined with the double density foam ears. Both ears can accommodate one audible altimeter on each side and fits the most common audible from LB Altimeters: Solo, Optima, Quattro and Protrack.

The TFX features a double ventilation system to keep your mind fresh even after intensive use. There are 2-way in/our air flow vents at the top and back of the helmet as well as an in-air flow vent for internal visor ventilation.

The TFX has been inspected and tested for:

  • Construction

  • Shock absorption capacity

  • Determination of field vision

  • Penetration test

  • Retention system performance

  • -20 degrees Celsius cold conditioning

  • 50 degrees Celsius hot conditioning

  • UV artifical aging

  • Water artifical aging

  • Crash Rated European standard EN966: 2012 + A1: 2012, category HPG for AIRBORNE SPORTS

  • Visor rated under standard EN166 for Personal Eye Protection

  • Complies to the newly developed Skydiving Helmet Standard XP S 72-600

So wide and so clear describes the TFX visor with a super-wide visual field as well antifog and antiscratch system. The visor is 2.3mm thick polycarbonate that guarantees a wide visual field without image distortion. The TFX visor is available in clear or smoke.

The visor has been rated under EN166 for Personal Eye Protection and tested for:

  • Field of vision

  • Lateral protection

  • Refractive powers

  • Quality of material and surface

  • Temperature stability

  • Diffusion of light

  • Surface damage by fine particles

  • Transmittance (UV stability)

  • Increased robustness

  • High speed particles

  • Ignition

Mix the colors on your TFX as you like it! You can mix colors between the shell, chin and side plates. Available colors for the TFX, in Matte or Gloss, include:

  • Dark Grey

  • Lemon Yellow

  • Black

  • Bay Blue

  • Bright Green

  • White

  • Orange

  • Pink

  • Red

All standard colors above as well as the clear visor is included in the same base price. The smoke visor, the X-Design and any other add-ons are extra.


  • Shell 0 with a 66.5cm (26.2 in) face circumference and available liner sizes of 54cm, 55cm, 56cm and 57cm

  • Shell 1 with a 68cm (26.8 in) face circumference with available liner sizes of 56cm, 57cm, 58cm and 59cm

  • Shell 2 with a 69.5cm (27.4 in) face circumference available liner sizes of 58cm, 59cm, 60cm and 61cm

The inside lining is made in two parts to allow fitting to different head shapes. The main lining is based on the head circuference. The secondary lining is based more on the shape of your face and is available in 3 different thicknesses: 5mm, 10mm and 15mm. This allows three different fits for every available size, giving the TFX 36 different available size combinations between shell size, main lining and secondary lining.

Additional detais:

  • Crash Tested EN966 + EN166

  • Complies with Skydiving Helmet Standard XP S 72-600

  • Shell Carbon Fiber Aramid

  • Visor Polycarbonate 2.3mm

  • Total weight Approximately 950 grams

  • Sizes 54cm to 61cm

  • Helmet type Modular


You can be measured by our ChutingStar Crew at our ChutingStar Skydiving Gear SuperStore in Marietta GA or at any event or boogie we are attending. Or, you can submit your own measurements following the measuring guide below. See the image below for a demonstration of the 3 measurements, plus the additional description below. Contact us for additional help with how the measurements are taken.

TFX Measurement Demo

  • Head Circumference: Measure the circumference of the head at the forehead height, being careful that the tape is horizontal and has the right tension (not too loose, not too tight)

  • Face Circumference: Extend the tape measure around the face, being careful to pass it on top of the chin, above the ears up to the top back of the head.

  • Face Width: Measure the face width by positioning 2 rulers (or similar objects), at the base of the ears and make sure they are held vertically and parallel between them. Extend the tape horizontally and measure the distance between the 2 points.

  • Upload a photo of the Face Width measurement being taken.

To configure your TFX, write in the desired colors above, or for further customization, please follow the instructions below.

The price listed is the base price of the TFX, and we've included some of the more common options to choose from. Any additional options selected with the online Tonfly Configurator will be added and charged to you after the ChutingStar Skydive Crew confirms the order with you and Tonfly.

Tonfly TFX Configurator Link

  • Begin by configuring your Tonfly TFX online with all your options, colors and any extras

  • At Step 3 (Comments & Requests), write ChutingStar Customer

  • At Step 4 (End), enter your first name, your last name, and then the ChutingStar e-mail address


  • Next, you return to here to pay for your suit by adding this suit and options to your cart and checking out on our site (and earning those ChutingStar SuperStar$ Rewards!)

  • Our ChutingStar Skydive Crew will combine your Tonfly TFX configuration, your in-shop head measurements and ChutingStar order, and will contact you to go over any additional questions and/or changes, and then finalize the order for production with Tonfly.

  • As soon as the TFX arrives from Tonfly, it will ship to you with any additional items ordered from ChutingStar!

Tonfly TFX User Manual Link

Detail Information

Audible Pockets or MountsLeft Inner Pocket, Right Inner Pocket
Carry Bag IncludedYes
Camera Mount OptionsNone
Chin Fastener OptionsChin Cup, Chin Strap
Liner TypeCertified thermoformed
Liner ReplaceableYes
Visor ReplaceableYes
Shell MaterialCarbon Fiber
Sizes AvailableXS, Small, Medium, Large, XL, 2XL
Helmet TypeOpen Face
Colors AvailableBlack, Blue, Green, Grey, Orange, Pink, Red, White, Yellow
Visor Flips UpYes
Visor TintClear or Smoke


Add your review

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Customer Reviews 1 item(s)

Worth every penny
I LOVE my TFX helmet! It is a very high quality helmet and it shows.
The pros: it's extremely comfortable! It is safety rated unlike most/all of the other helmets currently on the market. Being able to put it on like an open face helmet means a tighter/more secure fit while I'm flying. This also allows for riding up to altitude or walking back to the hangar after landing with the face open rather that feeling restricted or having to clip it to my chest strap. It's also great for briefing between rounds in the wind tunnel. It fits my head just right, even with flipping my long hair up on top of my head unlike most helmets. The liners are made to be removed, washed, and reinserted easily. The visor and front face locking mechanism is one-handed and easy to use once you get used to it. The visor doesn't really fog up like a G3. I got the helmet around mid February and could've left the visor closed with no problems as it only fogged a little in the bottom-center of the visor. Finally, since they're still pretty rare, owning one definitely makes you stand out in the crowd and starts a lot of conversations and gawking.
The cons: It has to be custom ordered so if you don't live near a dealer, it can be hard to order. Due to being custom made, the price is much higher than other helmets. Production time has to be taken into consideration so you can't order your helmet and have it in a few days like all of the other options. Also, the visor sometimes has a little bit of a whistle under canopy if you open it fully. I don't mind it but I could see where it could bother some people.
Overall: I LOVE this helmet and would recommend it to anyone with the patience to wait for it to be made and the budget to pay for it!
Review by Cecily / (Posted on 4/4/2019)


Custom Tonfly TFX Full Face Helmet