Mirage: Pin Check Procedures

All manufacturer's skydiving rigs are slightly different, so check this video and description out on how to give a pin check and put all the flaps back in place for your buddy's Mirage container.

The reserve pin cover flap can be lifted up to check the reserve pin, reserve closing loop and seal. To reclose the flap, tuck the side flaps first than tuck the bottom of the flap down. Make sure the flaps are fully seated and the flap is flat.

The main pin cover flap can be pulled down. The main pin, main closing loop and kill-line window can be checked. To reclose, insert the top of the main pin cover flap back into the upper pocket.

The AAD window is located horizontally on upper backpad section at the yoke.

To order a new Mirage G4 from ChutingStar, visit our online listing at this link.